tensixtyone

Dropbox is out of closed beta and is open for the public, but what is more interesting is that they now have a client for Linux. I’ve had a beta email sat in my inbox for about 3-4 months, but I’ve never got round to signing up as I couldn’t get a client for Linux.

Dropbox is one of the new wave of online storage, sort of a cross between WebDAV and SVN, in fact, I’d say its almost exactly like SVN, just with a nice GUI. I guess all it would need to take the “value-added” part of this product is for someone to develop a nice front end for Amazon S3, and by looking at their future prices it could be cheaper.

Anyway, picking out the bits of the service is not what I’m here to do. At the moment I run a Debian Testing/Unstable desktop machine, I was quite disappointed to not see a specific Debian package for their software on the website. I realised after a few dumb minutes that I could use the Ubuntu packages.

In sources.list, I referenced their Gusty archive

deb http://www.getdropbox.com/static/ubuntu gutsy main

Then in /etc/apt/preferences I set some basic package pinning to make sure that any packages didn’t collide with the existing Debian repository, not likely but you never know.

Package: *
Pin: release a=gutsy
Pin-Priority: 400

Do a “apt-get update” and you should have the “nautilus-dropbox” package available to install. Simple!

Remember, you’ll need to restart nautilus by either killing it (killall -9 nautilus) or restarting your Gnome session.

[edit: Fixed the first URL]

So, in my last post I described how it was using the E160G with Debian. All in all it’s very good and i’ve not experienced any major issues, bar a few minor apt-get and NetworkManager issues. So, heres a quick rundown of how to get it on your machine.

So first, you need to get the hardware to work correctly under Debian. Plug in your E160G and check dmesg to see if the device recognises correctly. If you see ttyUSB0/ttyUSB1 appear you can skip this step.

First, you need to download USB_Modeswitch:

# wget http://www.draisberghof.de/usb_modeswitch/usb_modeswitch-0.9.4.tar.bz2
# tar jxvf usb_modeswitch-0.9.4.tar.bz2
# cd usb_modeswitch-0.9.4/
# ./compile.sh

Now you have the usb_modeswitch program, as this will be executed by udev it needs to be in a sensible location, personally i’d copy it to /usr/local/sbin/

# cp usb_modeswitch /usr/local/sbin/

Also, you need to grab the latest config file from the usb_modeswitch website and put it into /etc

# wget http://www.draisberghof.de/usb_modeswitch/usb_modeswitch.conf
# sudo mv usb_modeswitch.conf /etc/

Now, by default the config file comes with the section commented out, so edit the file and uncomment the section for the E220 (which is essentially the same device).

# sudo $EDITOR /etc/usb_modeswitch.conf

One last step, you need to add a small configuration file to udev to detect the E160G and run usb_modeswitch, put this file in you /etc/udev/rules.d/ folder:

SUBSYSTEM=="usb", SYSFS{idProduct}=="1003", SYSFS{idVendor}=="12d1",
  RUN+="/usr/local/sbin/usb_modeswitch"

Restart udev, and plug in your E160G…

sudo /etc/init.d/udev restart

and you should see something similar to:

[   16.085904] usb 5-3: GSM modem (1-port) converter now attached to ttyUSB0
[   16.086033] usb 5-3: GSM modem (1-port) converter now attached to ttyUSB1

So, the device is detected and you have your USB ports, first a quick overview. The E160G shows two serial ports, one is a data port, the other is for control signals. NetworkManager only makes use of one of these ports but the Vodafone Connection Manager uses both. Now you have a choice, install Network Manager 0.7 to gain native GPRS/UMTS data support or use another package. I went for Network Manager, while it’s still in beta and i’ve had a few run-ins in the past with it I decided to give it a go.

So, it was a simple case of adding the 0.7 repositories to /etc/apt/sources.list, updating, then installing the needed packages.

# echo "deb http://debs.michaelbiebl.de/ unstable main" >> /etc/apt/sources.list
# apt-get update
# apt-get -t unstable install network-manager

You might need to remove any old Network Manager packages before you do this, as network-manager-openvpn collides with the new package.

Hopefully thats give you the overview you needed, and you should be up and running!